Delta Masonry

Masonry and Outdoor Tile Built on Solid Ground in Clarksdale

In the Delta, the ground itself is part of every masonry project. Flat land and heavy clay soils mean water lingers and the soil shifts with the seasons, which can crack brick and stone that were not built for it. This page explains how a masonry contractor Clarksdale MS homeowners hire should handle footings and drainage, then covers patios, walkways, firepits and outdoor kitchen backsplashes. Tekton Exteriors serves Clarksdale and Coahoma County with free estimates.

Delta Soil and Why the Footing Comes First

Clay-rich soils swell when wet and shrink when dry, and on flat lots rainwater has nowhere to go. Masonry is rigid, so any movement below shows up as cracks above. We dig below the topsoil, build a compacted gravel base or a reinforced concrete footing sized to the structure, and grade the surrounding area so water drains away instead of soaking in beside your new work.

Patios, Walkways and Firepits

Brick and stone walkways need edge restraints so they do not spread over time. Patios need a slight slope to shed rain. Firepits need a solid base, a firebrick lining or steel insert to handle heat, and a way for rainwater to drain from the bowl. For poured paving and driveways, see our concrete and hardscaping services in Clarksdale.

Backsplashes That Stand Up to Grease, Heat and Sun

An outdoor backsplash behind a grill takes splatter, smoke and direct sun. Exterior porcelain, dense stone and brick all clean up well. We set them on cement board or masonry with exterior-rated thin-set, seal porous materials and leave proper clearance where the grill manufacturer requires it.

Our Step-by-Step Build

  1. Site visit to check soil, drainage and layout.
  2. Design, samples and an itemized estimate.
  3. Excavation, base and footings.
  4. Masonry or tile installation.
  5. Curing, sealing, cleanup and walkthrough.

Want a complete backyard? Our decks and outdoor living services in Clarksdale pair well with masonry features.

Common Questions

What materials work for outdoor backsplashes in Clarksdale?

Exterior-rated porcelain, natural stone, brick and manufactured stone veneer all perform well. We help you choose based on look, budget and how close the backsplash sits to the grill.

What masonry services do you offer in Clarksdale?

We build patios, walkways, firepits, seat walls, columns, veneer and outdoor kitchen backsplashes, and we repair existing masonry.

How long does a masonry project take?

A backsplash usually takes a few days, while patios and firepits generally take one to two weeks, depending on size and weather.

Can you add a custom stone feature to my backyard?

Yes. We design firepits, fireplaces, seat walls and accent walls to suit your space and style.

Do you maintain or repair existing outdoor stonework?

Yes. We reset loose pavers, repoint cracked mortar joints, reseal porous stone and fix settled walkways. If cracking keeps coming back, we look at drainage and the base underneath rather than just patching the surface.

Build Masonry That Stays Put

Schedule a free site visit in Clarksdale and we will plan a foundation suited to your soil.

Request Your Free Estimate

Call (662) 222-4277