Matching the Material to the Building
- The house. Architectural shingles or standing seam metal, chosen for appearance, budget and how long you plan to stay.
- Shops and garages. Exposed-fastener metal panels are durable and cost-effective, provided the screws and washers are installed and spaced correctly.
- Barns and equipment sheds. Metal is the usual choice; we check purlins and framing before new panels go on.
- Porches and lean-tos. Low pitches may need a membrane or metal rather than shingles to stay watertight.
Many owners like to match metal colors across buildings so the property looks unified. Our article on metal roofs versus shingles in Mississippi lays out the trade-offs for the main house.
Trees, Wind and Rural Exposure
Mature trees shade a roof but also drop limbs, clog valleys with leaves and hold moisture against shingles, which encourages moss and rot. Open fields let wind reach the roof at full strength. On rural properties we pay close attention to ridge caps, rake edges and any area under overhanging limbs, since those are the first places damage shows up after a storm.
How We Run a Multi-Building Project
We inspect every structure you want looked at and give you a written proposal broken out by building, so you can do everything at once or phase the work. On replacement day we tear off to the deck or framing, repair damaged wood, install underlayment and flashing, and then the new roofing. A house typically takes one to three days, with outbuildings scheduled around it. Shingle buyers can review options on our Pontotoc shingle installation page.
Maintenance That Pays Off
Clear leaves from valleys and gutters each fall, trim limbs back from the roof, and check metal roofs for loose or backed-out screws every year or two. After a hailstorm or strong wind, a quick inspection is worth it. If storm damage is involved, see our Pontotoc storm damage and insurance claim page.
Common Questions
Can you roof my house and my shop in the same project?
Yes. We inspect each building and price them separately in one proposal, so you can complete everything together or spread it out over time.
Is exposed-fastener metal good enough for a house?
It can be, and it costs less than standing seam. The trade-off is that the exposed screws need periodic checking. Standing seam hides its fasteners and is usually preferred for a home's main roof.
How do I know my roof needs replacing rather than repairing?
Missing shingles, leaks, ceiling stains and an age of about 20 years are common signs. On metal roofs, widespread rust or loose panels point toward replacement. An inspection tells you which applies.
How long does a Pontotoc roof replacement take?
A house usually takes one to three days. Additional buildings add time depending on their size and condition.