Hinds County Roofer

The Workmanship Behind a Long-Lasting Clinton Roof

Two roofs can use the same shingle and perform very differently. The difference is in the details most homeowners never see. This page explains how we work as a roofer in Clinton, MS: the steps we take under the shingles, the spots where shortcuts commonly cause leaks, and how warranties fit in. If you are comparing bids, these are the questions worth asking. Tekton Exteriors serves Clinton and communities throughout Hinds County.

Starting With a Sound Deck

After tear-off, we walk the entire deck. Soft, delaminated or rotted sheathing is replaced, and loose boards are re-secured. Nails only hold as well as the wood they go into, so this step directly affects wind resistance.

Underlayment and Water Barriers

Synthetic underlayment covers the deck, with self-adhered ice-and-water membrane in valleys, around chimneys and at other high-risk areas. Drip edge goes on at eaves and rakes so water drips cleanly into gutters instead of wicking behind fascia.

Flashing and Nailing Done Right

  • Step flashing is woven with each shingle course along walls
  • Counter flashing covers step flashing at chimneys
  • New pipe boots replace old ones every time
  • Nails go in the manufacturer's nailing zone, at the right count per shingle
  • Starter strips seal the first course at eaves and rakes

High or crooked nails are a leading cause of shingles blowing off.

Ventilation and the Warranty

Balanced intake and exhaust ventilation keeps the attic cooler and protects the shingles from below. Our workmanship and the manufacturer's coverage are explained in writing before the job is closed out. For larger or mixed-use properties, see Clinton commercial and residential roofing. Long-lasting options also include standing seam metal; compare it in metal roof versus shingles.

Common Questions

What are the signs I need a repair rather than a replacement?

A single leak or a few damaged shingles on a roof that is otherwise flexible and intact usually means repair. Widespread curling, heavy granule loss, daylight in the attic or a roof around 20 to 25 years old often points to replacement.

How long does a typical roof replacement take?

For an average-sized home in Clinton, a full replacement is usually completed in one to three days.

What is the best type of roof for Clinton's climate?

Architectural shingles installed with proper underlayment and ventilation perform well for most homes. Standing seam metal is a durable alternative with a higher upfront cost.

What does your workmanship warranty cover?

It covers the installation work we perform. We explain the terms and the manufacturer's material warranty in writing so you know exactly what is included.

Why do you replace pipe boots on every job?

Old boots are usually close to the end of their life when a roof is replaced, and reusing them saves very little. A new boot keeps that penetration sealed for the life of the new shingles instead of failing halfway through.

See the Difference Good Workmanship Makes

Schedule a free Clinton roof inspection and ask us anything about how we install.

Request Your Free Estimate

Call (662) 222-4277